Skip to content

Electrician in Bath for Georgian and period conversions

Bolt Electrical repair, test and upgrade electrics across Bath, from honey-stone Georgian terraces with circuits added piecemeal over centuries to converted barns and mews houses that need proper modern supplies. We find what's behind the old plaster and leave your period features intact.

Electrical work being carried out by the Bolt Electrical team in a Bath property

What Bath's character buildings need from an electrician

Bath's housing spans from Regency crescents to Victorian conversions to modern developments. Each type brings distinct electrical challenges, and each one calls for different solutions.

  • Property

    Georgian and Regency period homes

    The Royal Crescent, Circus, Pulteney, Lansdown, Walcot

    What we find

    Original stone walls make chasing cable difficult, shared supplies between properties, and circuits that have been patched and extended without plan. Period cornicing and plasterwork must be protected.

    What we do

    Use surface trunking and carefully run cables in existing routes to avoid damaging original features. We work with conservators and planners when needed, and design solutions that keep the character of the building.

  • Property

    Victorian and Edwardian terraces

    Bathwick, Larkhall, Oldfield Park, Dolemeads

    What we find

    Rewires done decades ago but not all circuits updated, fuses mixed in with breakers, and spaces between floors too tight for modern cable runs. Basement levels and long cable routes add complexity.

    What we do

    Test every circuit and advise which parts need replacing. We plan routes that work with the building's layout, upgrade the consumer unit to modern RCD protection, and check that everything is safe before you use it.

  • Property

    Converted barns and rural properties

    Keynsham, Saltford, Compton Dando, Pensford

    What we find

    Long runs from the supply to outbuildings, damp in converted spaces, and sometimes the original supply was never properly rated for modern use. Farm buildings that now have living spaces need careful earthing and RCD setup.

    What we do

    Upgrade the incoming supply if needed, run cable safely across external walls or in buried duct, and add RCD protection to every circuit. We test earthing properly in rural ground and make sure weatherproofing is correct.

  • Property

    Modern flats and new developments

    City centre, Riverside, Keynsham, Twerton

    What we find

    Shared supplies, landlord requirements for safety certificates, and sometimes work carried out by multiple contractors that hasn't been signed off properly.

    What we do

    Carry out inspection and test reports for insurance and lettings, complete any notifiable work correctly, and make sure all circuits are properly documented and protected.

Getting the job done in Bath's older buildings

Georgian stone, narrow streets and listed building rules mean we plan carefully. Tell us these details when you book so we arrive properly prepared.

Listed building consent

If your property is listed or in a conservation area, some electrical work needs planning consent first. We tell you which work needs it, and can advise on approved methods.

Stone walls and plasterwork

Running cable through period stone without damaging it takes planning. We use surface trunking and careful routing to protect original features and keep things looking right.

Narrow streets and shared access

Many Bath streets are narrow and parking can be tight. Tell us the postcode and any access rules when you call, so we can plan parking and arrival time properly.

Power cuts and planning

Most upgrades need the supply off for a time. We'll tell you exactly how long beforehand, so you can plan around it. Everything gets tested before power goes back on.

Bath and the areas we cover

We work across Bath and the surrounding districts. Here are the main areas we serve regularly.

  • City centre
  • Walcot
  • Oldfield Park
  • Bathwick
  • Larkhall
  • Dolemeads
  • Weston
  • Keynsham
  • Saltford
  • Compton Dando
  • Pensford
  • Twerton

Work outside Bath? See our Bristol electrician page or call us on 07123456789 to check your postcode.

Finished electrical work by Bolt Electrical

Bath electrical questions, answered

Straightforward answers on old wiring, listed buildings, emergencies and what to expect from a full test.

Do we need planning permission for electrical work in a listed Bath property?

Listed building consent is usually needed if the work involves running new cable visibly on walls, fitting external equipment, or making changes to original features. Some routine upgrades like replacing a consumer unit inside can be done without consent, but we check first. If you're unsure, call 07123456789 and describe the job — we know Bath's rules and can advise before you apply.

How long does it take Bolt Electrical to reach a job in Bath from Bristol?

Bath and Bristol are close, so our standard callout times apply the same way. For routine faults and repairs, we aim for same-day service on weekdays. We cover emergency callouts 24/7, so if you have a serious fault, call 07123456789 and we'll talk you through what to do.

What should I do if my old circuit breakers keep tripping?

Repeated tripping usually means one circuit is overloaded, there's a fault in the wiring, or the RCD is too sensitive. Never keep resetting it — that's the safety device doing its job. Call us on 07123456789 and we'll visit to test the circuit properly and find out what's causing it. Sometimes it's a simple fix like redistributing sockets; other times the circuit needs upgrading.

Can you work around listed building rules when upgrading a consumer unit?

In many listed properties, the consumer unit sits in a cupboard or utility room inside the building, which means the upgrade often doesn't need consent. We know which solutions the planners accept and which need approval first. When you call, tell us where the board sits and we'll advise. If consent is needed, we can help with the process.

How much does electrical testing cost, and what does it cover?

We quote for testing once we know the size of the property and how many circuits there are. The test checks every circuit, all earthing and bonding, and RCD protection. You get a detailed written report covering any work that needs doing. Call 07123456789 with your postcode and property type and we'll give you a ballpark figure.

If I'm moving into an old Bath house, should I get an electrical inspection?

Yes. If the house hasn't been fully tested in years, an inspection and test report (called an EICR) is worth doing before you move in. It shows what's safe and what needs attention. Many mortgage lenders and home insurers now ask for one too. Call us on 07123456789 to book, and we'll give you a report within a few days.

Electrical problem in Bath? Call us now.

Tell us what you need and we'll tell you what happens next.

07123456789