Tripped RCD or circuit breaker
The most common call we get
The board trips as soon as you plug something in, or only on certain circuits. In older terraces it may trip randomly with no clear cause.
What it usually means: a faulty appliance, a wet environment, old cable insulation, or corrosion on connections inside the board itself.
Dead sockets and switches
One room or one circuit affected
A socket does not work but others do, or the lights in the kitchen have failed while the bedroom is fine.
What it usually means: a tripped fuse or breaker for that circuit alone, a loose connection at the board, a broken socket, or a fault in the cable.
Flickering or dim lighting
Often a sign of loose connections
Lights dim when other appliances come on, or one light flickers while others are steady. Victorian properties with old wiring report this frequently.
What it usually means: poor earthing, a loose connection at the light fitting or the board, corrosion in the cable, or the supply wire itself needs attention.
Burning smell or scorch marks
Stop using it immediately
A smell from a socket, switch or the consumer unit, or dark marks around any electrical fitting.
What it usually means: arcing, overheating cable or a fault inside the board. This is a fire risk and needs urgent attention.
Intermittent power loss
The power cuts out and comes back
Happens sporadically, sometimes only in damp weather or when it is cold. Flats and conversions often have this issue.
What it usually means: moisture getting into connections, a corroded component in the board, or an intermittent fault in the cable.
New appliances trip the board
Everything was fine until you plugged it in
A new oven, shower, heat pump or large appliance causes immediate trips or blows fuses. The old fuse box or board cannot handle the load.
What it usually means: the appliance is legitimate but the supply or protection is too small. The board may need upgrading or the appliance its own dedicated circuit.